Trang chủ >> Máy in hãng HP >> Laser Đen Trắng

Máy in HP đen trắng Laser Jet 5200L - Khổ A3

Xem ảnh lớn hơn

Từ khóa:

Máy in HP đen trắng Laser Jet 5200L - Khổ A3

Mã hàng: MI461

Loại máy in: Máy in Laser đen trắng

Mã mực : HP 16A Q7516A

Khổ giấy in tối đa: A3, A3+

Trọng lượng : 20.2 kg

Kích thước (Rộng x Sâu x Cao) : 490 x 563 x 275 mm

Tốc độ in: Khoảng 25 trang đen / phút

Độ phân giải: 600 x 600 dpi (với kỹ thuật VSDT)

Chuẩn kết nối: USB 2.0 Hi – Speed,

Chức năng đặc biệt: đang cập nhật

Hàng Mới 100%. Miễn phí giao hàng trong nội thành Hà Nội.

Đặt hàng qua điện thoại: (04) 3733.4733 - (04) 3733.7973

(04) 3747.1575-098.990.2222 - 098.648.3333 - 097.649.5555

Tình trạng: Hết hàng

Bảo hành: 36 tháng

Giá bán: 19.990.000 VND [Giá đã bao gồm VAT]

In báo giá | Giới thiệu với bạn bè:

Loại máy in: Máy in Laser đen trắng

Mã mực : HP 16A Q7516A

Khổ giấy in tối đa: A3, A3+

Trọng lượng : 20.2 kg

Kích thước (Rộng x Sâu x Cao) : 490 x 563 x 275 mm

Tốc độ in: Khoảng 25 trang đen / phút

Độ phân giải: 600 x 600 dpi (với kỹ thuật VSDT)

Chuẩn kết nối: USB 2.0 Hi – Speed,

Chức năng đặc biệt: đang cập nhật

Hàng Mới 100%. Miễn phí giao hàng trong nội thành Hà Nội.

Đặt hàng qua điện thoại: (04) 3733.4733 - (04) 3733.7973

(04) 3747.1575-098.990.2222 - 098.648.3333 - 097.649.5555

Physical specifications

Printer dimensions
Printer model	Height	Depth	Width	Weight
HP LaserJet 5200 and 5200n	275 mm (10.8 in)	535 mm (21 in)	490 mm (19.3 in)	20.2 kg (44.5 lb)
HP LaserJet 5200tn and 5200dtn	404 mm (15.9 in)	535 mm (21 in)	490 mm (19.3 in)	5200tn: 30.2 kg (66.5 lb) 5200dtn: 33.1 kg (73 lb)
Optional 500-sheet feeder	130 mm (5.1 in)	535 mm (21 in)	490 mm (19.3 in)	9 kg (20 lb)

Without print cartridge

Printer dimensions with all doors and trays fully opened
Printer model	Height	Depth	Width
HP LaserJet 5200 and 5200n	275 mm (10.8 in)	980 mm (38.6 in)	490 mm (19.3 in)
HP LaserJet 5200tn and 5200dtn	404 mm (15.9 in)	1090 mm (42.9 in)	490 mm (19.3 in)

top

Electrical specifications

WARNING: Power requirements are based on the country/region where the printer is sold. Do not convert operating voltages. This can damage the printer and void the product warranty.

Power requirements
Specification	110-volt models	220-volt models
Power requirements	110 to 127 volts (± 10%) 50/60 Hz (± 2 Hz)	220 to 240 volts (± 10%) 50/60 Hz (± 2 Hz)
Rated short-term current	10.0 Amps	5.0 Amps

Power consumption (average, in watts)
Printer model	Printing	Ready ,	Sleep	Off
HP LaserJet 5200	625 W	11 W	8.5 W	0.4 W
HP LaserJet 5200n	625 W	11 W	8.5 W	0.4 W
HP LaserJet 5200tn	625 W	11 W	8.5 W	0.4 W
HP LaserJet 5200dtn	625 W	11 W	8.5 W	0.4 W

Values subject to change. See www.hp.com/support/lj5200 for current information.

Power numbers are the highest values measured using all standard voltages.

Default time from Ready mode to Sleep = 30 minutes.

Heat dissipation in Ready mode = 37.5 BTU/hour.

Recovery time from Sleep to start of printing = less than 8.5 seconds.

Print speed is 35 ppm.

top

Acoustic emissions

Sound power and pressure level ,
Sound power level	Declared per ISO 9296
Printing	L_WAd = 6.6 Bels (A) [66 dB(A)]
Ready	Essentially Inaudible
Sound pressure level	Declared per ISO 9296
Printing	L_pAm =52 dB (A)
Ready	Essentially Inaudible

Values subject to change. See www.hp.com/support/lj5200 for current information.

Configuration tested: base printer, simplex printing with A4 paper size.

Print speed is 35 ppm.

top

Operating environment

Necessary conditions
Environmental condition	Printing	Storage/standby
Temperature (printer and print cartridge)	15° to 32.5°C (59° to 89°F)	-20° to 40°C (-4° to 104°F)
Relative humidity	10% to 80%	10% to 90%

top

Paper specifications

For complete paper specifications for all HP LaserJet printers, see the HP LaserJet printer family print media guide (available athttp://www.hp.com/support/ljpaperguide ).

Category	Specifications
Acid content	5.5 pH to 8.0 pH
Caliper	0.094 to 0.18 mm (3.0 to 7.0 mils)
Curl in ream	Flat within 5 mm (0.02 in)
Cut edge conditions	Cut with sharp blades with no visible fray.
Fusing compatibility	Must not scorch, melt, offset, or release hazardous emissions when heated to 200°C (392°F) for 0.1 second.
Grain	Long grain
Moisture content	4% to 6% by weight
Smoothness	100 to 250 Sheffield

Envelopes

Envelope construction is critical. Envelope fold lines can vary considerably, not only between manufacturers, but also within a box from the same manufacturer. Successful printing on envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the following components:

Weight : The weight of the envelope paper should not exceed 105 g/m² (28 lb) or jamming might occur.
Construction : Prior to printing, envelopes should lie flat with less than 6 mm (0.25 in) curl, and should not contain air.
Condition : Envelopes should not be wrinkled, nicked, or otherwise damaged.
Temperature : You should use envelopes that are compatible with the heat and pressure of the printer.
Size : You should use only envelopes within the following size ranges.
- Minimum : 76 x 127 mm (3 x 5 in)
- Maximum : 216 x 356 mm (8.5 x 14 in)